Note the side lock in the open and closed position Tie systems available in 1"" dia taper ties or she bolts and 1/2"" NC thread inner ties.

• For ganging using a customer's standard steel ply panels sandwiched around the Gates Aluminum Gang Form Adapter
• Features taper ties, she bolts w/ inner ties, and flat coil bolts

Gangs and Gang Adapters are easily stacked using the Gates 22" aluminum splice plate. Each Gang Adapter has two 1/2" coil thread opening on the back side to attach the splice plate or top and bottom walers.

A large job set, braced, ready for concrete.

Workman assembling panels using the Gates 3/4 x 4" flat coil bolts. There is also available 2" and 6" long flat coil bolts for special connection applications.

Panel assembled, scaffolding attached, and bracing attached, ready for picking and placement.

3 1/2 x 3 1/2 LVL waler attached with Gates Waler Bracket.

Variation of waler attachment, using the 1/2" coil thread opening on the back side of the 4" Alum. Gang Form Adapter. Notice the 22" splice plate.

Gates 4" Gang Form Adapter used with steel ply panels in an elevator shaft application.

A large expanse of a job with shafts, interior and exterior forms.

Note the flat form being flown in the foreground.

Finished concrete product.

A large gang being flown. Notice the pick beam and the vertical connection cables.

A close up of the Gates Scaffold Bracket Adapter being used at the bottom of a connection point of a standard steel ply type scaffold.