HOME
PRODUCTS
MANUFACTURERS
SERVICES
LOCATION
CONTACT US
CREDIT
ABOUT
BACK TO 48WS
BROWSE CATEGORIES
> Bolt
> Nail
> Nut
> Screws
> Staple
> Washer
Abrasives
Access Doors | Vents | Roof Access
Adhesives | Sealants | Tape
Air & Pneumatic Tools
Automotive | Fleet | Vehicle Maintenance
Cleaning | Waste Removal | Waste Storage
Concrete and Asphalt Chemicals
Concrete Forming
Construction Fabrics
Decorative Concrete
Diamond Products
Doors and Windows
Drill Bits and Drilling Accessories
Drywall | Ceiling | Wall Panels
Electronics | Batteries
Equipment
Erosion Control | SWPPP
Fasteners | Anchors
Fastening Pins & Inserts
Flooring
Food Service
Hand Tools
Hardscapes
Hardware Supplies
Hospitality
Hydraulic Products
Industrial Motors and Engines
Industrial Pumps
Industrial Raw Materials
Laboratory Products
Ladders | Platforms | Scaffolding
Leveling | Measuring | Surveying
Lifting Equipment
Lighting Supplies
Lubrication | Oils | Grease
Lumber Products
Machining Supplies
Masonry
Material Handling | Storage | Containment
Office Supplies
Outdoor Products
Plumbing Supplies
Power Tool Accessories
Power Tools
Power Transmission Products
Presses & Shop Equipment
Radios
Rebar and Wire Mesh
Refrigeration | HVAC | Air Treatment | Etc.
Rental Equipment
Rental Equipment / Forms
Roofing and Siding
Safety Equipment and Products
Saw Blades
Security Equipment and Accessories
Shop Vacuums
Sports Drinks and Thirst Quenchers
Strapping
Structural Hardware
Strut, Channel, & Fittings
Testing Instruments for all Purposes
Tiles and Detectable Warning Pads
Tilt Up
Tool Storage | Job Site Boxes | Truck Boxes | Transfer Tanks
Trench Drains
Waterproofing Products
Welding Products and Equipment
Home
/
Categories
/
Structural Hardware
/
Simpson Strong-Tie
/
Simpson Anchoring and Fastening Systems for Concrete and Masonry
/
Simpson Mechanical Anchors
/
Simpson Titen Concrete and Masonry Screws
/
Search:
TITEN HD® Heavy Duty Screw Anchor - Zinc Plated
Simpson Strong-Tie
(click image to enlarge)
SKU / Product Info
Quantity
THDB62400H
Size (in.):
5/8 x 4
THDB62500H
Size (in.):
5/8 x 5
THDB62600H
Size (in.):
5/8 x 6
THDB62612H
Size (in.):
5/8 x 6-1/2
THDB62800H
Size (in.):
5/8 x 8
THDT75600H
Size (in.):
3/4 x 6
Quick Overview
Features:
Code-listed under the current IBC/IRC in accordance with AC193 for cracked concrete applications per ICC-ES ESR-2713
Code-listed under the current IBC/IRC in accordance with AC106 for masonry applications per ICC-ES ESR-1056
Thread design undercuts to efficiently transfer the load to the base material
Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility that helps prevent breakage
No special drill bit needed: Designed to install using standard-sized ANSI tolerance drill bits
Installs with 50% less torque: Testing shows that when compared to competitors, the Titen HD requires 50% less torque to be installed in concrete
Hex-washer head: Requires no separate washer and provides a clean installed appearance.
Removable: Ideal for temporary anchoring (e.g. formwork, bracing) or applications where fixtures may need to be moved. Re-use of the anchor to achieve listed load values is not recommended.
The self-undercutting, non-expansion characteristics of the Titen HD anchor make it ideal for structural applications, even at reduced edge distances and spacings.
Recommended for use in permanent dry, interior, non-corrosive environments or temporary outdoor applications, the Titen HD has been tested to offer industry-leading performance in cracked and uncracked concrete under both static and seismic loading conditions.
Some jurisdictions require an additional square plate washer for sill plate applications.
Material:
Carbon steel, heat treated
Finish:
Zinc plated
Codes:
ICC-ES Evaluation Service ESR-2713 (concrete) ICC-ES Evaluation Service ESR-1056 (CMU) City of Los Angeles RR25741 (concrete) City of Los Angeles RR25560 (CMU) Florida Statewide Product Approval FL15730.7 Factory Mutual 3017082, 3035761 and 3043442
Interested in this item or want more information?
Phone:
Email:
Sales@48ws.com
Can't find what you want? Give us a call and we can help you find it.
Details
* The Titen HD® screw anchor 3/4" x 6" and 3/4" x 7" (models THDT75600H and THD75700H) have a 1" section under the head that is unthreaded to allow installation into tilt-up wall braces.
Additional Information
Manufacturer: Simpson Strong-Tie
Search:
Copyright © 2020 48ws.com.
Powered by 48ws.com