HOME
PRODUCTS
MANUFACTURERS
SERVICES
LOCATION
CONTACT US
CREDIT
ABOUT
BACK TO 48WS
BROWSE CATEGORIES
> Bolt
> Nail
> Nut
> Screws
> Staple
> Washer
Abrasives
Access Doors | Vents | Roof Access
Adhesives | Sealants | Tape
Air & Pneumatic Tools
Automotive | Fleet | Vehicle Maintenance
Cleaning | Waste Removal | Waste Storage
Concrete and Asphalt Chemicals
Concrete Forming
Construction Fabrics
Decorative Concrete
Diamond Products
Doors and Windows
Drill Bits and Drilling Accessories
Drywall | Ceiling | Wall Panels
Electronics | Batteries
Equipment
Erosion Control | SWPPP
Fasteners | Anchors
Fastening Pins & Inserts
Flooring
Food Service
Hand Tools
Hardscapes
Hardware Supplies
Hospitality
Hydraulic Products
Industrial Motors and Engines
Industrial Pumps
Industrial Raw Materials
Laboratory Products
Ladders | Platforms | Scaffolding
Leveling | Measuring | Surveying
Lifting Equipment
Lighting Supplies
Lubrication | Oils | Grease
Lumber Products
Machining Supplies
Masonry
Material Handling | Storage | Containment
Office Supplies
Outdoor Products
Plumbing Supplies
Power Tool Accessories
Power Tools
Power Transmission Products
Presses & Shop Equipment
Radios
Rebar and Wire Mesh
Refrigeration | HVAC | Air Treatment | Etc.
Rental Equipment
Rental Equipment / Forms
Roofing and Siding
Safety Equipment and Products
Saw Blades
Security Equipment and Accessories
Shop Vacuums
Sports Drinks and Thirst Quenchers
Strapping
Structural Hardware
Strut, Channel, & Fittings
Testing Instruments for all Purposes
Tiles and Detectable Warning Pads
Tilt Up
Tool Storage | Job Site Boxes | Truck Boxes | Transfer Tanks
Trench Drains
Waterproofing Products
Welding Products and Equipment
Home
/
Categories
/
Drill Bits and Drilling Accessories
/
Coring Bits
/
Search:
Thick Wall Core Bit 1-3/4 in.
48-20-5130
Milwaukee
Milwaukee Thick Wall Core Bit 1-3/4 in. 48-20-5130
(click image to enlarge)
Quick Overview
1-3/4 in. diameter
Usable cutting depth 4-3/8 in.
Thick wall
Use with thick wall core bit shank 48-03-3564 (12 in.) or 48-03-3565 (18 in.)
Interested in this item or want more information?
Phone:
Email:
Sales@48ws.com
Can't find what you want? Give us a call and we can help you find it.
Details
Milwaukee's Core Bits are ideal for large hole drilling where depth is relatively shallow. The Core Bit cuts a kerf only. The usable depth of Thick Wall Core Bits is 4-3/8 inch. The inside core must be removed by the operator before deeper drilling can be accomplished. The Thick Wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 inch extension is available to allow for the deeper holes to be drilled. The appropriate (dependant on the diameter) Spline Drive Shank must be used to drive the Core Bit. Use 48-20-5199 Center Pin and 48-20-5169 Guide Plate for positioning and starting the hole. Thick Wall Core Bits are available from 1 inch to 6 inch diameters. See Thin Wall Core Bits for less expensive drilling in NEW concrete and/or smaller hammers.
Additional Information
Manufacturer: Milwaukee
Search:
Copyright © 2020 48ws.com.
Powered by 48ws.com